Test & measurement · Infrared sensing+886 2 8797 1799

VIGO PHOTONICS · SMART TAIWAN

PVIA-4TE-4 infrared detector

PVIA-4TE-4-1x1-TO8-wAl2O3-36

A four-stage TE-cooled InAsSb photovoltaic detector with optical immersion and a wedged sapphire window. Use this configuration when evaluating mid-infrared gas-analysis, spectroscopy or optical measurement designs.

PVIA-4TE-4-1x1-TO8-wAl2O3-36

Specifications and configuration

Key specifications
Material / detectionInAsSb / photovoltaic
Typical spectral range≤2.0–4.7 μm (10% response)
Peak wavelength3.5 μm (typ.)
Optical area1 × 1 mm
Cooling / chip temperature4TE / approximately 200 K
Package / acceptance angleTO8 / approximately 36°
Typical D*3.7 × 10¹¹ cm·Hz½/W (λpeak, 20 kHz)
Typical current responsivity1.7 A/W (λpeak)
Typical time constant30 ns

Tamb = 293 K; Tchip = 200 K; Vb = 0 V.

Typical values are not guaranteed limits. Refer to the original English datasheet for full test conditions, minimum / maximum values and operating limits. D* figures measured at different frequencies are not directly comparable.

Manufacturer spectral response

PVIA-4TE-4-1x1-TO8-wAl2O3-36 — manufacturer typical spectral response; conditions shown in the graph and datasheet
VIGO Photonics typical spectral curve; evaluate at the stated conditions and intended operating wavelength.

Selection and integration considerations

  • Match beam size and incidence angle to the optically immersed structure.
  • Plan the readout amplifier, TEC controller and heatsink as part of the configuration.
  • Specify the operating wavelength, modulation frequency and optical power before selecting a part.

Original English documents and resources

Start with your measurement requirements

Share the model or application, wavelength, signal bandwidth, quantity and desired schedule. Unknown items can be discussed during selection.

Submit a VIGO inquiry