Test & measurement · Infrared sensing+886 2 8797 1799

VIGO PHOTONICS · SMART TAIWAN

32MM-5 32-channel InAsSb MWIR module

32MM-5

A 32-channel InAsSb superlattice module integrating a transimpedance amplifier and TEC controller. The 6 × 6 layout with four omitted corners supports multi-point sensing, spectroscopy and MWIR readout development.

32MM-5

Specifications and configuration

Key specifications
MaterialInAsSb superlattice heterostructure
Typical spectral range1.7–5.7 μm (10% response)
Channels / arrangement32 / 6 × 6 minus four corners
Active area per element0.1 × 0.1 mm
Element pitch0.15 mm (horizontal / vertical)
Cooling / chip temperature3TE / approximately 230 K
Typical bandwidth1 Hz–1 MHz; AC-coupled
Typical D*4.0 × 10⁹ cm·Hz½/W (λpeak, 500 kHz)
TEC controllerIntegrated
ConnectorMolex 87831-5019; mating plug 87568-5044

Tamb = 293 K; Tchip ≈ 230 K; Rload = 1 MΩ, each channel.

Typical values are not guaranteed limits. Refer to the original English datasheet for full test conditions, minimum / maximum values and operating limits. D* figures measured at different frequencies are not directly comparable.

Manufacturer spectral response

32MM-5 — manufacturer typical spectral response; conditions shown in the graph and datasheet
VIGO Photonics typical spectral curve; evaluate at the stated conditions and intended operating wavelength.

Selection and integration considerations

  • An integrated TEC controller does not remove the need for an external heatsink.
  • Its AC-coupled response differs from the DC-capable 32EM-5-01 readout; equal channel count does not establish interchangeability.
  • Confirm power, output and pinout against the selected module revision. The module is not a complete camera.

Original English documents and resources

Start with your measurement requirements

Share the model or application, wavelength, signal bandwidth, quantity and desired schedule. Unknown items can be discussed during selection.

Submit a VIGO inquiry