Test & measurement · Infrared sensing+886 2 8797 1799

VIGO PHOTONICS · SMART TAIWAN

32EM-5-01 32-channel HgCdTe MWIR module

32EM-5-01

A 32-element linear HgCdTe photovoltaic array with an integrated first-stage transimpedance amplifier for multi-channel MWIR measurements. An external TEC controller and heatsink are required.

32EM-5-01

Specifications and configuration

Key specifications
MaterialHgCdTe heterostructure
Typical spectral range2.0–5.6 μm (10% response)
Channels / arrangement32 / one linear row
Active area per element0.125 × 1.000 mm
Element pitch0.15 mm
Cooling / chip temperature3TE / approximately 230 K
Typical bandwidthDC–400 kHz
Typical D*5.0 × 10⁹ cm·Hz½/W (λpeak, 10 kHz)
TEC controllerExternal
Readout32-channel first-stage transimpedance amplifier

Tamb = 293 K; Tchip = 230 K; Rload = 1 MΩ.

Typical values are not guaranteed limits. Refer to the original English datasheet for full test conditions, minimum / maximum values and operating limits. D* figures measured at different frequencies are not directly comparable.

Manufacturer spectral response

32EM-5-01 — manufacturer typical spectral response; conditions shown in the graph and datasheet
VIGO Photonics typical spectral curve; evaluate at the stated conditions and intended operating wavelength.

Selection and integration considerations

  • The array is linear, unlike the two-dimensional element arrangement of 32MM-5.
  • Provide an external TEC controller; the manufacturer recommends a heatsink near 2 K/W, subject to installation conditions.
  • Confirm channel synchronisation, output range and DAQ compatibility before designing the subsequent readout stages.

Original English documents and resources

Start with your measurement requirements

Share the model or application, wavelength, signal bandwidth, quantity and desired schedule. Unknown items can be discussed during selection.

Submit a VIGO inquiry